• An experienced and reliable supplier of Hardware Fittings and Accessories for Distribution & Transmission Overhead Line Network applications. All Products are manufactured and Type Tested as per International Standards like IEC, ASTM, BS, DIN, ISO etc.

• Insulators supplied are in accordance IEC standards. Insulators specifications are carefully reviewed by our expert team and technical solution is offered to meet the requirements.
• The Insulators are durable and quality which is backed up with a warranty.
• With its advanced features and high-quality construction, this insulator offers superior performance in various environmental conditions.

• Supplier of Transmission Line Fitting Strings for Transmission Overhead Line Network applications. All Products are manufactured and Type Tested as per International Standards like IEC, ASTM, BS, DIN, ISO etc.
• Refer our catalogue for reference. We can supply to meet your design requirements.

• ADSS hardware includes preformed tension clamp, armor grip suspension, Thimble Clevis, Armour Rod, Downlead Clamp
• OPGW accessories also called OPGW hardware fittings, OPGW fittings or OPGW hardware are designed for use in the OPGW fiber optic cable construction.

• We offer a full range of AB Cable (Aerial Bundled Cable) accessories and fittings which conform to NFC and IEC standards. These products are available for all varieties and sizes of AB Cables.
• Our product range includes products such as Insulated Piercing Connector, Anchoring Clamp assemblies, Suspension Clamp assemblies, Dead End Clamp assembles, Tension Clamp Assemblies, Pig Tail Hooks, Anchoring and Suspension Brackets, Suspension brackets, End Caps, etc.

• Supply of Vibration/Spacer Dampers, Repair sleeves, Cradle clamps, Pg clamps, Line taps, Pistol grip strain clamps, Palm clamps, Earth tail clamps, Earth rod clamps

• Fittings are designed in accordance to IEC and ANSI standards. They can withstand the Mechanical and Electrical loads that can occur at any levels of voltage in electrical lines as per the technical offer and suitability to the Specifications confirmed to their application.

• Drop-out fuses (DOF) are designed for the use in various applications i.e. high-voltage transformers and other electrical equipment. DOF aim to protect the equipment from a short circuit or overload by breaking down when they reach a certain temperature. There are many different types of dropout fuses, each with its own characteristics and applications. The most common type is a 33KV dropout fuse that protects against over-currents of up to 33KV in length. We can offer to suit the technical and environment being used for its application and suitability.

• Supply of High quality Wooden Poles in accordance to their wood species and specifications for the application.
• The Wooden poles shipped are used for electricity distribution and transmission as well as for telecom networks. Our impregnated poles are supplied according to customers’ standards and are treated or untreated depending on specifications stipulated.

• We supply all sizes of Stay Assembly sets used in electrical power distribution systems to provide additional support and stability to utility poles or structures.
• It typically consists of a combination of hardware components such as Stay Rods, Guy Wire Clamps, Pole Bands, and other fittings assembled into a single unit. Stay rod set are installed diagonally from the pole to the ground or to an anchor assembly, helping to prevent leaning or swaying of the pole, especially in areas prone to high winds or other environmental stresses.

We offer a wide range of electric power cable including the medium voltage cross linked polyethylene cable (XLPE); Paper-Insulated cable (PILC); Aerial Bundled Conductor (ABC), Overhead Aluminium Conductors (ACSR) and related products and accessories ie:

• Aluminum Conductors — AAAC, ACSR
• High Conductivity Power Conductors
• Copper Conductors — Hard & Soft Drawn
• Earth Conductors — Al Clad & Cu Clad
• OPGW Conductors
• Insulated Conductors
• Covered Conductors

We work in partnership with OEM’s and offer best quality service to meet our client’s requirements.

We offer a variety of Quality Substation Clamps & Connectors as specified by our clients:

• Power Transformers – 132 KV & above
• Shunt Reactors – up to 800 KV
• Package Substations – 33 KV & above
• Mobile & Stationary
• Cast Resin Dry Transformers – up to 33 KV , 25 MVA
• GIS Switchgears – up to 33 KV
• AIS Switchgears – up to 22 KV
• RMUs – up to 33 KV
• Capacitor Bank – from 33 to 132 KV
• DC Systems – 48 &110 V

We work in partnership with OEM’s and offer best quality service to meet our client’s requirements.

We offer to supply a comprehensive range of earthing material, such as Earth Rods, Earth Rod Connectors, Crimp C Connectors, Copper Plate Earthing, Earth Rod Clamps, Copper Clad Steel Connectors and many more.
 

• Earth Rods & Accessories
• Lightning Protection
• Exothermic Welding
• Clamps & Connection Accessories
• Surge Protection Devices & Solutions

We offer variety of safety equipment and PPE for linesman and personnel working on high voltage electrical switchgear.

• Earthing and Short Circuit Devices
• Telescopic Link sticks or Hotsticks 2M-15M
• Portable Working Earthing Kits
• Rubber Insulated gloves (1000v-33000v)
• Substation Insulated Rescue Sticks
• Voltage Detectors
• Insulated Gloves, Boots Etc .
• Locking Devices
• Live Working Tools
• Arc Flash Protection Kits
• Warning Tapes
• PPE